How To Program A Gm Key Fob

Close all vehicle doors.
How to program a gm key fob. Push and hold the LOCK and UNLOCK button at the same time on the first remote you wish to program. Get key blank cut by a locksmith before commencing the above. How to Program GM Key Fobs.
To program additional remotes repeat step 4. Insert the ignition key into the ignition lock cylinder. Insert FasLink X Fob Key Programmer into vehicles OBDII Port.
Insert your key into the ignition and press and hold the Unlock tab on your drivers side door. This process is very cheap and simple for a quick repai. Below a few examples of GMC remote key fobs that require programming machine.
Within 10 seconds insert new key and turn on. Our team knows it all and the job can be done faster than you think. Press the odometer stem.
Close all of the doors but make sure they are unlocked. Press and hold Key Fob lock and unlock buttons simultaneously until a Buzzer sounds or door locks cycle. How to Program most GM Key Fobs.
Turn the key in the ignition to On and then back to Off two times in quick succession. Hold the buttons down together until the vehicle responds by. Insert new key and turn on do not start Wait 10 minutes security light will turn off Turn key off.



















