How To Charge A Motorcycle Battery With A Battery Charger

If you are using a smart charger all you need to do is connect the batter to the charger using the standard color-coded cables to ensure proper polarity.

How to charge a motorcycle battery with a battery charger. Most chargers these days comes with quick connect 2-Pin SAE Waterproof Wire Harness Plug cables. If in doubt consult the owners manual. Smart chargers regulate the charge flow otherwise you will need to adjust the charge according to your battery needs.

Note that 1 hour of continuous power supply from the running vehicle is needed to charge the battery. Attach the opposite red clamp to the. ALWAYS use a MotorcycleTrickle Charger when charging Motorcycle BatteriesA Motorcycle charger supplies NO MORE than 75 Amps during the charging process.

When the battery is ready the charger will enter float mode or turn itself off. Learn what battery tender options. Use alligator clips jump leads for connections and charge your battery enough to get back to your home.

Finally I happily say that the amazing feature of a modern motorcycle is the battery charge itself. Attach the other black clamp to the negative terminal of the working battery ensuring that the black and red clamp do not touch each other during this process Start your motorcycle. Positive RED charger lead to positive battery post and negative BLACK charger lead to negative battery post.

These quick connect cables are extremely handy as they allow you to easily plug and unplug the battery from the charger while the battery is still in the bike. Learn how to charge and maintain your Motorcycle battery and some helpful. Connect the battery terminals and the charger using the safe connecting clamps in a correct way.

By using a battery charger you will fully charge the battery again. After the battery is charged which you may know with an indicator you can remove the charger from the battery carefully. Unplug the charger or turn it off before you disconnect the leads which will cut down on the chance of the clamps arcing on the terminals.