How To Fix Lcd Ribbon Cable

I was replacing the battery in my sons iPhone 6 and one of the ribbon cables has a tear in it.

How to fix lcd ribbon cable. The proper fix would be to replace the connector with a new one but this requires a person with fairly good SMT skills and equipment. These irons have a thin silicone strip installed at the top that allows gentle heat transfer from the iron through the silicone tip to the ribbon to activate the glue without melting the plastic ribbon. It seems that it was glued on the buffer board and i was able to heat them up to disconnect them however all i need to know is what type of adhesive do i use to reattach them.

Only 6 left in stock - order soon. There are various conductive paintsinks and adhesives. LCD flex ribbon repare Dear Paranam77 Thanks.

Yiu have to swap tha lcd back plate from the old one theres one ribbon thete and also swap the camara from the old phone theres a nother. Get it as soon as Wed Oct 27. I dont know which would be best.

Dip a flathead jewelers screwdriver into the prepared epoxy and apply it to the ribbon wire. Some say it can be done but with good experience micro solderingequipmenttools Knowledgepatience. Now the home button will not work and the touch screen will not work.

I used an emery-board to rub off the rust and patina on the pins at the end of the ribbon but it turns out that the pins are really soft metal and I ended up rubbing off the conductors themselves. This bit is optional but could help with mechanical stability of the LCD ribbon. Of the paintsinks there is one that deposits pure silver and is solderable.

A good microscope a steady hand and a really good temperature controlled soldering iron are the minimum tools for the job. Up to 1 cash back Special Features. FREE Shipping on orders over 25 shipped by Amazon.